Комплект распредвалов и пружин HKS Step2 для Nissan GTR R35

200 200 руб.

Этот комплект был спроектирован для высокой отдачи двигателя без потери мощности во всем диапазоне оборотов и плавной кривой крутящего момента. Использование этих клапанных пружин и распредвалов новейшего дизайна с высоким поднятием клапана могут существенно увеличить отдачу двигателя GTR R35. Когда этот комплект используется с другими деталями HKS Step2 и турбо китом HKS GT800 турбины включаются раньше а мощность может превысить 850 л.с. POINT-1 HKS Original Materials Exclusive chill camshaft material for HKS is used. POINT-2 Must be used with the special Valve Spring. Duration and valve lift were both designed larger than a stock. The Valve Spring included in this set must be used with this high lift camshaft. POINT-3 Optimized Camshaft Profile Lift volume was decided after the cylinder head measurement and flow test. Duration was decided to be well-balanced with a selected lift volume on the power curve at all range. The camshaft profile was optimized to clear points of the valve flow and/or cam lobe friction. POINT-4 Stock Valve Timing. The knock pin phase to position the cam pulley is the same as a stock so the valve timing can be same as a stock. The cam sensor trigger position is the same as a stock so the malfunction of the stock ECU won't happen. POINT-5 Higher Reliability by In-house Design & Production HKS controls from the production, inspection, package, and shipment for quality assurance. MADE IN JAPAN (HKS In-house Production) Specification Stock HKS IN Valve Lift (mm) 9.2 11.0 EX Valve Lift (mm) 9.5 11.0 IN Valve Duration 238° 270° EX Valve Duration 248° 278° Base Radius (mm) 35.5 35.5 IN-VP (mm) - 2.6 EX-VP (mm) - 8.7 STEP2 CAMSHAFT ENGINE OUTPUT

Заказать